CREATING A BUBBLING ROCK

WHY INSTALL A BUBBLING ROCK?

Water features are one of today’s hottest trends in landscaping. Environmentally friendly and completely customized, water features can be installed almost anywhere in your outdoor living area Bubbling rocks are very low maintenance yet provide many of the benefits that ponds bring. The sound of water, the appearance of the feature – the wow factor, especially the effects that night lighting produce. Moving water becomes a resource and sanctuary for wild life. Enhanced landscaping improves property value and water features provide soothing sights and sounds that help you relax and de-stress in today’s busy world. Energy efficient pumps and the use of timers make running the bubbler very cost efficient. We teach seminars on How To Build A Water Feature. These seminars go over the basic steps to simplify the process for you.

HOW TO START

IMPORTANT - the most important aspect to consider when building a bubbling rock is – where will you get the most enjoyment out of it? Where will you be able to see it the most, and hear that wonderful calming sound? How much space do you have to work with? Do you already have a decorative rock picked out or do you need to get one from our yard? Do you have access to hydro where you would like to put your bubbler, or can you get hydro to that spot easily?

Take the time to do some research. Look at different designs and styles and see which features suit your taste, budget and purpose. We have many design booklets available at Silverthorn Landscape Supplies to give you great ideas.

Get your measurements! Write down your length, width, and height. Write down all measurements and be sure to include slopes and any differences in grade throughout the area you are planning to build on.

Sketch out a plan. It is important to get your ideas down on paper. This helps when communicating your ideas to others so that everyone is on the same page. Be sure to include your measurements and write down specific products that you know you’d like.

TOOLS YOU MAY NEED

silverthorn landscape supplies
paper & pen

silverthorn landscape supplies
tape measure

silverthorn landscape supplies
stakes & string

silverthorn landscape supplies
marking paint

silverthorn landscape supplies
square

silverthorn landscape supplies
level

silverthorn landscape supplies
shovel

silverthorn landscape supplies
wheelbarrow

silverthorn landscape supplies
rake

silverthorn landscape supplies
gloves

silverthorn landscape supplies
chisel

silverthorn landscape supplies
safety glasses

silverthorn landscape supplies
knee pads

silverthorn landscape supplies
rubber mallet

silverthorn landscape supplies
hose

PRODUCTS YOU MAY NEED

silverthorn landscape supplies
decorative rock

silverthorn landscape supplies
basin

silverthorn landscape supplies
tubing

silverthorn landscape supplies
pump

silverthorn landscape supplies
clamps

silverthorn landscape supplies
decorative gravel

silverthorn landscape supplies
night lighting

OPTIONAL ADDITIONAL MACHINERY

• Skidsteer • Stone Saw
*Make sure you are qualified to run any equipment you may rent, or have someone who is experienced with machinery come out and help.

INSTALLATION

1. PLAN

Go through the How to Start list, make a good plan, be sure to include your measurements, which type of product you need, and quantities.

2. PREPARATION

Pick out your rock! Choose a piece that gives you the look and sound you would enjoy coming home to everyday. Does it need to be drilled? No problem – we got you covered.
Choose the basin size. This is determined based on the type of rock you have chosen, size, weight, and splash factor.
Ask the staff to help you pick out the appropriate sized pump and tubing you will need to give you the water flow you desire.
Light it up! Pick out some night lighting for your bubbler – this adds value and incredible beauty to your feature. Core lights are also available.
Choose the decorative stone to go around your feature.Decorative gravel, flagstone, pavers, your choice!

3. EXCAVATE

* If you are putting the basin on a deck, pre-existing structure (patio, pool deck or drive-way area), or are setting it on the ground and building up and around the basin, please disregard this step.

Mark out the area to be excavated.
*Remember to call the appropriate utility companies to find out where any lines may be buried before you dig! Phone, cable TV, internet, gas, hydro, waterlines, city piping…etc.

Excavate the area where you will be putting the basin. Excavate down 6-10” deeper than your basin’s depth. Have the very top of your basin be flush with the ground/grass.
*If a basin does not work for your project requirements, you can use liner and underlay in place of a basin. If you would like more information on this process give us a call and we can walk you through it.

4. BASE

Place Advanced Performance Bedding into the excavated area and level. Your gravel base should stop when the remaining depth of the hole will fit your basin flush with the outside ground.

If you are building your feature above ground be sure the area is as level and stable as possible.

5. BASIN PLACEMENT

Place the basin into the leveled hole. Backfill around the sides of the basin. Using a rubber mallet level the basin once you have completed backfilling.

6. ATTACHMENTS

Place the pump into the bottom of the basin. Attach the tubing to the pump and tighten with a clamp. Feed the tubing up through the center hole of the basin.

7. FEATURE ATTACHMENT

Place your rock onto the basin, while feeding the tubing up through your feature. Set your feature as close to the center of the basin as possible.
*If you have chosen a core light it is important to attach it before your tubing. Place the light into your feature and let the cord hang through the hole all the way out the bottom. Then place your tubing. The cord for your core light should run in between your feature and the tubing, not IN the tubing.

8. WATER FLOW

Fill the basin with water. Plug in the pump and adjust the height of the tubing in your rock to change water flow (push the tubing up higher for a bigger bubble, or pull it halfway down your feature for a smaller bubble). If the water flow is uneven, check the angle of the rock itself. You may have to move it around, or place small wedges underneath the rock to achieve desired angle and water flow.

9. FINISHING TOUCHES

Sweep the pavers clean and compact them with a plate compactor. Be sure to pass over your entire patio a minimum of three times in varying directions. This final tamping allows the pavers to settle into the Limestone Screenings. *Note: Certain speciality pavers require a pad on the plate compactor so as to not scratch or damage the paver.

ENJOY!
Sit back and enjoy your handy work!

PRINT INSTRUCTIONS

silverthorn landscape supplies facebook silverthorn landscape supplies youtube silverthorn landscape supplies pinterest